« Trender OPNFV » : différence entre les versions

Version du 1 mai 2017 à 21:26

Trender OPNFV

The tuto explains how to build your own OPNFV trender.

This trender has been shown during OPNFV Plugfest in Paris.

3mm MDF or plywood
a Wemos D1 mini [1] : a micro controler arduino-like including a wifi chipset
a 7 neopixel led [2]: you can of course use less leds, there are possible shields with 1 or 4. 7 can be interesting to play with light within the box
Soldering iron
a USB cable (power)
Time..

I created very basic simple boxes. The RLD file used by the laser cutter can be found on fablab github:

It basic basic shapes including

We use the laser cutter to cut and engave the box and the styroglass support.

You can obviously customized it according to your needs.

@@ Ligne 5 : / Ligne 5 : @@
 This trender has been shown during OPNFV Plugfest in Paris.
+[[Fichier:trender-opnfv.png|vignette]]
-[[Fichier:trender-opnfv.png]]
+== What is needed ==
+* 3mm MDF or plywood
+* a Wemos D1 mini [https://www.wemos.cc/product/d1-mini.html] : a micro controler arduino-like including a wifi chipset
+* a 7 neopixel led [https://www.adafruit.com/product/2226]: you can of course use less leds, there are possible shields with 1 or 4. 7 can be interesting to play with light within the box
+* Soldering iron
+* a USB cable (power)
+* Time..
+== The boxes ==
+I created very basic simple boxes. The RLD file used by the laser cutter can be found on fablab github:
+[[File:opnfv-rld.png|400px]]
+It basic basic shapes including
+* regular box
+* some support for the electonic
+* a styroglass support for the light (No product with Chlorine)
+We use the laser cutter to cut and engave the box and the styroglass support.
+[[File:20170325_115720.jpg|400px]]
+You can obviously customized it according to your needs.
+== Electronic part ==
+== software part ==