Voir la source de Exemples de tarifs d'utilisation des équipements

Exemples de tarifs dans d'autres fablabs :

== Bruxelles ==
[http://www.fablab-brussels.be/machines.html Source]

=== imprimante 3D ===

* Makerbot 2 / makerbot
** low cost
** 0.15 euro/gram
* DIMENSION 3D PRINTER
** professionnelle
** 1 euro/cm³ of printed plastic + 1 euro/cm³ of support material

=== CNC ===
* BZT PORTAL MILLING MACHINE
** grande taille
** 10 euro/hour + the cost of the milling bit if you break it.

* PROTOMAT 95S/II PRINTED CIRCUIT BOARD MILLING
** 0.35 euro/minute of machine time 

* ISEL ICP4030 3-AXIAL MILLING MACHINE WITH OPTIONAL ROTATIONAL AXIS
** 10 euro/hour + the cost of the milling bit if you break it

* PROTOMAT S63 PRINTED CIRCUIT BOARD MILLING MACHINE WITH SOLDER PASTE DISPENSER
** 0.35 euro/minute

=== Découpeuse laser ===
* CYBORG 1080 LASERCUTTER 60W 
** 0.35 euro/minute of machine time. 

=== autre ===
* PCB ETCHING TOOLCHAIN
** 5 euro per eurocard (10x16cm)

== Lyon ==

=== Imprimante 3D ===
* ultimaker
** 21€/h Et
** 14€/h part

=== Découpe laser ===
* Trotec Speedy 300
** 60€/h entreprises
** 45€/h particulier

=== Decoupe vinyl ===
* Camm1 servo (Roland) / Caméo (Silhouette)
** 12€/h Et
** 8€/h part